Máy ủi bánh xích Cat

D1

The new Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
  • EASY TO OPERATE: GRADE with 3D and Slope Assist™ helps achieve the best quality grading results, while new technologies make machine operation easier and more efficient.
  • Up to 10% LOWER TOTAL OWNERSHIP COST with improved fuel economy, long undercarriage life and easy maintenance.
  • Up to 15% MORE PERFORMANCE with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.
Yêu cầu báo giá
Engine Model Cat C3.6
Power - Net 59.7 kW
Displacement 3.6 l
Net Power - 2,200 rpm - SAE J1349 59.7 kW
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 59.7 kW
Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Power Train Hydrostatic
Operating Weight  8099 kg
Operating Weight - LGP 8545 kg
Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in 8752 kg
Note (2) For machine with ripper, add 554 kg (1,222 lb).
FOPS ISO 3449:2005 Level II
ROPS ISO 3471:2008
Drive Pumps 1
Maximum Travel Speed - Reverse 10 km/h
Relief Valve Settings 48500 kPa
Maximum Travel Speed - Forward 9 km/h
Track Motors 2
Length - Track on Ground - LGP, 762 mm (30 in) 2248 mm
Length - Track on Ground - LGP 2248 mm
Track Gauge - LGP 1725 mm
Shoe Width - LGP, 762 mm (30 in) 762 mm
Track Gauge - LGP, 762 mm (30 in) 1860 mm
Shoe Width - LGP 635 mm
Track Gauge 1495 mm
Shoe Width - Standard 406 mm
Ground Pressure - LGP 29.9 kPa
Ground Pressure - LGP, 762 mm (30 in) 25.5 kPa
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43
Number of Rollers - Each Side 6
Length of Track on Ground 2248 mm
Number of Shoes - Each Side - Abrasion Undercarriage  38
Ground Pressure  44.5 kPa
Final Drive - Each - LGP 10 l
Cooling System 19 l
Diesel Exhaust Fluid (DEF) Tank 19 l
Transmission - Hydraulic Tank 90 l
Crankcase - With Filter 10.5 l
Fuel Tank 195 l
Final Drives - Each Side  10 l
Pump Output 65 l/min
Relief Valve Settings 20600 kPa
Type Parallelogram
Number of Shanks 3
Height 165 mm
Weight 554 kg
Maximum Ground Clearance Under Tip 448 mm
Maximum Digging Depth 337.5 mm
Overall Width 1710 mm
Maximum Reach - Ground Line 766 mm
Weight 610 kg
Winch Drive Hydrostatic
Control Hydraulic
Speed Variable
Drum Capacity - Optional Cable 78 m
Maximum Line Speed - Full Drum 63 m/min
Rope Diameter - Optional 19 mm
Maximum Line Pull - Full Drum 11340 kg
Maximum Line Speed - Bare Drum 40 m/min
Rope Diameter - Recommended 16 mm
Drum Width 274 mm
Drum Capacity - Recommended Cable 113 m
Maximum Line Pull - Bare Drum 18144 kg
Drum Diameter 254 mm
Winch Length 705 mm
Throat Clearance 171.5 mm
Overall Width 741 mm
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
BLADE: Digging Depth - Intermediate 573 mm
Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in) 2411 mm
BLADE: Blade Capacity (SAE) - LGP 1.99 m³
BLADE: Blade Lift Height - LGP 730 mm
Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in) 3291 mm
BLADE: Maximum Tilt - LGP 438 mm
BLADE: Blade Width - LGP 3149 mm
Ground Clearance - LGP 332 mm
BLADE: Blade Width at Maximum Angle - LGP 2874 mm
BLADE: Digging Depth - LGP 573 mm
BLADE: Blade Lift Height - Intermediate 743 mm
Track Gauge - LGP 1725 mm
Ground Clearance - LGP, 762 mm (30 in) 332 mm
Width - Tractor - Standard Shoes - No Blade - LGP 2360 mm
BLADE: Blade Height - LGP 860 mm
Overall Length - With Blade - LGP, 762 mm (30 in) 4262 mm
Track Gauge - LGP, 762 mm (30 in) 1860 mm
BLADE: Blade Height - Intermediate 860 mm
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
Tractor Height - LGP, 762 mm (30 in) 2765 mm
BLADE: Maximum Angle (either side) - LGP 25°
BLADE: Blade Capacity (SAE) - Intermediate 1.5 m³
Length - Basic Tractor - Without Blade - LGP 3291 mm
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58°
BLADE: Blade Width at Maximum Angle - Intermediate 2669 mm
BLADE: Maximum Tilt - Intermediate 448 mm
BLADE: Blade Width - Intermediate 2921 mm
BLADE: Maximum Angle (either side) - Intermediate 25°
Tractor Height - LGP 2765 mm
Overall Length - With Blade - LGP 4262 mm
Note *Abrasion Undercarriage
BLADE: Blade Width at Maximum Angle - Standard  2417 mm
BLADE: Digging Depth - Standard  573 mm
BLADE: Blade Width - Standard  2646 mm
BLADE: Blade Lift Height - Standard  730 mm
Ground Clearance - Standard  332 mm
BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58°
Tractor Height - Standard  2765 mm
Length - Basic Tractor - Without Blade - Standard  3291 mm
BLADE: Maximum Angle (either side) - Standard  25°
BLADE: Maximum Tilt - Standard  368 mm
BLADE: Blade Capacity (SAE) - Standard  1.52 m³
Track Gauge - Standard  1495 mm
BLADE: Blade Height - Standard  910 mm
Width - Tractor - Standard Shoes - No Blade - Standard  1900 mm
Overall Length - With Blade - Standard  4273 mm

Nội dung liên quan

icon-message.png
1800 599 990
icon-message.png
Live chat