Động cơ phụ trợ
Yêu cầu báo giá
Tải về Tài liệu sản phẩm
C9.3 AUXILIARY ENGINE
Động cơ đẩy/Động cơ phụ trợ/Máy phát điện tàu thủy CAT C9.3 sử dụng hệ thống nhiên liệu common rail để tối ưu hiệu suất hoạt động và tiêu chuẩn khí thải. Tùy chọn hệ thống làm mát bằng bộ trao đổi nhiệ hoặc làm mát vỏ tàu và tùy chọn mạch làm mát kết hợp hoặc riêng biệt. C9.3 được chứng nhận đáp ứng tiêu chuẩn EPA Tier 3 và IMO II.
360
| Công suất tối thiểu | 218.0 bkW |
| Công suất tối đa | 325.0 bkW |
| Kiểu nạp khí | TA |
| Đường kính | 115.0 mm |
| Cấu hình | In-Line 6, 4-Stroke-Cycle Diesel |
| Dung tích xylanh | 9.3 l |
| Chiều quay tính từ cuối bánh đà | Ngược chiều kim đồng hồ |
| Hành trình píttông | 149.0 mm |
| Khối lượng động cơ | 2083-2474 lbs (945-1122 kg) |
| Chiều cao | 1093.0 mm |
| Chiều dài - Động cơ | 1452.0 mm |
| Chiều rộng - Động cơ | 978.0 mm |
The electronic control system provides industry-leading torque and throttle response at low speeds, while maintaining fuel efficiency at high speeds
Common rail fuel system enables optimum combustion and low emissions
RH and LH locations for fuel and oil filters and dipstick improves serviceability
Compatible with Cat® displays
Available remote-mounted display panel with start, stop, and engine diagnostics
12V or 24V electrical system
Marine classification society certificates: ABS, BV, CCS, CRS, DNV, GL, IRS, KR, LR, NK, PRS, RINA, RS
- Separate circuit after-cooled (SCAC)
- Open Crankcase Ventilation (OCV) system
- Turbocharger, jacket water cooled
- Turbocharger inlet, 152 mm (6 in) OD straight connection
- Programmable low idle
- Electronic diagnostics and fault logging
- Electronic fuel/air ratio control
- Engine Protection Mode for extended ambient conditions - EPA Tier 3 Ratings Only
- 70-pin customer connector
- Three types of throttle inputs (primary/ secondary PWM, 0-5V, 4-20mA
- Separate Circuit After-Cooling (SCAC) for both HEX and Keel cooled engines
- Engine JW and SCAC Shell & Tube Heat Exchangers for HEX cooled engines
- SCAC pump, gear driven, for HEX cooled engines only
- Jacket water pump, gear driven
- Auxiliary water pump, gear driven
- Sea water pump, bronze impeller, gear driven
- SCAC and JW shunt tanks for maintaining proper pump inlet pressures
- 152 mm (6 in) round flanged outlet
- Water-cooled exhaust manifold & turbocharger
- Flywheel Housing, SAE No. 0
- Flywheel, 18 inch, 136 teeth
- SAE standard rotation
- Front service simplex fuel system
- Fuel transfer pump, gear driven
- Manual fuel priming pump
- Hybrid fuel line design
- Front service simplex oil system
- Center sump oil pan:
- Front and top service oil filler locations
- Front service dipstick
- Oil pump, gear driven
- Front support - adjustable
- Hydraulic Pump Drive
- Crankshaft Pulleys
- Front Stub Shaft
- Front Enclosed Clutch
- Front damper guard
- Front service engine
- Common electrical bonding point
- Engine does not ship with zinc components
- NOTE: These engines are for constant speed generator set applications only, and NOT to be used for variable speed applications
- Dry Elbows
- Water-Cooled Elbows
- Flexible Fitting
- Flange
- Muffler
- Muffler Spark Arresting
- Air Inlet Adapter
- Battery Chargers
- Charging Alternators
- Alternator Mounting Group
- Ammeter
- MECP I - Marine Engine Control Panel
- Caterpillar Alarm and Protection
- Load Sharing Attachment
- Aux Expansion Flange Kit
- Duplex Fuel Filters
- Fuel Cooler
- Primary Fuel Filters
- Flexible Fuel Lines
- Instrument Panels
- OEM Wiring Harness
- Gauges
- Oil Level Sensor
- Duplex Oil Filters
- Sump Pump
- Crankshaft Pulleys
- Front Stub Shaft
- Hydraulic Pump Drive Adapter
- Front Enclosed Clutch
- Marine Classification Society and SOLAS
- Electric Starting Motors - Single 24 Volt
- Air Starting Motor
- Air Start Accessories
- Starting Aids - JW Heaters
- Battery Sets - 24 Volt - Dry
- Front Support
- REAR ENGINE SUPPORT
- Engine Protective Cover
- Storage Preservation
- Export Packing
1800 599 990
Live chat