Cat® 320 GX mới là một chiếc máy đào thủy lực 20 tấn đáp ứng mọi kỳ vọng của khách hàng về độ tin cậy và vận hành đơn giản, cùng với việc dễ dàng bảo dưỡng và chi phí sở hữu hợp lý sẽ giúp khách hàng hoàn vốn đầu tư nhanh hơn.
The machine’s electrohydraulic system allows accurate bucket control for maximum precision.
Start the engine with a push button.
Navigate quickly on the high-resolution 203 mm (8 in) touchscreen monitor.
Control the excavator comfortably with easy-to-reach controls all located in front of you.
Program your preferences for power mode, joystick pattern, and joystick response using Operator ID. The excavator will automatically remember your selections.
Do daily maintenance at ground level.
Up to 20 percent less maintenance cost than the 320D2 GC due to enhanced filters and extended and synchronized service intervals (savings calculated over 12,000 machine hours).
The new air intake filter with precleaner has double the dust holding capacity of the previous air intake filter. Final drive and swing drive oil is double the initial service life – from 250 to 500 hours.
Fuel filters are synchronized to be changed at 1,000 hours – double the interval from the previous filters.
The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is
replaced, and longer life with a 3,000-hour replacement interval – 50 percent longer than previous filter designs.
Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to help increase undercarriage life.
Auto warm up speeds up hydraulic oil warming in cold temperatures and helps prolong the life of components.
Advansys™ bucket tips increase penetration and improve cycle times. Tip changes can be done quickly with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.
S·O·SSMoil sampling ports are on ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis
The excavator uses up to 15 percent less fuel than the 320D2 GC in similar applications.
Match the excavator to the job with a choice of two modes: Power and Smart. Power mode provides full-time maximum output. Smart mode automatically matches engine and hydraulic power to digging conditions to help conserve fuel without impacting production.
Product Link™ comes standard so you can remotely monitor fuel consumption as well as machine health, location, and hours on demand through VisionLink®.
Save fuel with Automatic Engine Control (AEC). It reduces engine speed when the machine is not under load to minimize fuel consumption.
A versatile machine that performs well in bucket and hammer applications.
Booms and sticks are robotically welded and checked ultrasonically to ensure maximum durability.
Reliable and durable and built on classic, proven components.
The Cat C4.4 engine and electrohydraulic system work in sync to help you move plenty of material while using less fuel.
Fast cycle times give you excellent productivity.
A hammer-ready valve is standard for added versatility.
Two levels of fuel filtration protect the engine from contaminated diesel fuel.
Cat undercarriage is built strong to absorb jobsite stresses for enhanced performance and durability.
General duty buckets are designed for fast material discharge and cleaning.
Work up to 4500 m (14,760 ft) above sea level with engine power derate above 3000 m (9,840 ft).
Standard high-ambient temperature capability is 52°C (125°F) with cold start capability at -18°C (0°F).
The cab has a wide seat that adjusts to suit individual operator preferences.
Standard automatic climate control helps keep you comfortable all shift long.
Excellent work site visibility from the cab enhances productivity and safety.